Loading ...
Loading ...
Loading ...
218
Try touching the four dots again and repeat this process until the touch indicators appear in the
correct position.
12. When you are finished with adjustments, use the remote control to select Close.
Parent topic: Using Finger Touch Interactivity
Performing Touch Unit Setup (Manual)
You can manually adjust the angle of the laser light coming from the Touch Unit so that the Touch Unit
can detect the position of your fingers. Once you have performed Touch Unit Setup, perform touch
calibration.
Note: You can purchase a touch unit as an optional accessory or use a compatible touch unit from an
older projector. When using an older model of the touch unit, angle adjustment is not automatic.
Note: Make sure you have calibrated the pens, installed the Touch Unit, and turned the Touch Unit on
before performing setup. See the online Installation Guide for Touch Unit installation information and
click the link below for pen calibration instructions.
1. Press the Menu button, select the Installation menu, and press Enter.
2. Select Touch Unit and press Enter.
3. Select Touch Unit Setup (Manual) and press Enter.
4. Select the option for the Touch Unit installation method that was used and press Enter.
5. If you are using the Touch Unit Bracket, turn the adjustment screw on the bracket counterclockwise
until it stops. Otherwise, skip to step 9.
6. Attach the two markers to the positions shown on the projected screen, making sure the thinner
ends of the markers are facing the Touch Unit.
Note: Do not place anything other than the markers near the projected image during angle
adjustment. If other objects are on or near the projected image, angle adjustment may not be
performed correctly.
Loading ...
Loading ...
Loading ...