Loading ...
Loading ...
Loading ...
106
13. Enter the IP address for the Internet time server you want to use and select OK.
14. Select Set and press Enter.
15. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Related references
Administration Settings - Management Menu
Image Shape
You can project an evenly rectangular image by placing the projector directly in front of the center of the
screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off
to the side, you may need to correct the image shape for the best display quality. After correction, your
image is slightly smaller.
For the best quality images, try to adjust the projector's position to achieve the correct image size and
shape. After you have corrected the position of the projector, you can use the adjustments in this section
to correct the image shape.
Note: For interactive use, the image must be evenly rectangular, without distortion. Refer to the online
Installation Guide for instructions on positioning the projector to achieve an evenly rectangular image.
After performing any Geometry Correction, you need to calibrate the system again.
Note: If your projector uses the ELPMB62 wall mount, use the adjustment dials on the wall mount to
correct the screen image before using any other digital correction methods. You can select Menu >
Installation > Setting Plate Installation Guide for information on the mount adjustments.
Correcting Image Shape with the Keystone Buttons
Correcting Image Shape with Quick Corner
Correcting Image Shape with Arc Correction
Correcting Image Shape with Point Correction
Correcting Image Shape with Corner Markers
Applying Saved Image Shape Settings
Parent topic: Using Basic Projector Features
Correcting Image Shape with the Keystone Buttons
You can use the projector's keystone correction buttons to correct the shape of an image that is
unevenly rectangular on the sides.
Loading ...
Loading ...
Loading ...