Loading ...
Loading ...
Loading ...
Thermal Network Bullet Camera User Manual
87
4. Click Linkage Method and check the checkbox to select the linkage method
taken for the alarm input. Refer to Task 3: Set the Linkage Method for Motion
Detection in Section 9.1.1.
5. You can copy your settings to other alarm inputs.
6. Click Save to save the settings.
9.1.4 Configuring Alarm Output
Figure 9-9 Alarm Output Settings
Steps:
1. Enter the Alarm Output Settings interface: Configuration> Event > Basic
Event > Alarm Output.
2. Select one alarm output channel in the Alarm Output drop-down list. You can
also set a name for the alarm output (optional).
3. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or
Manual. The delay time refers to the time duration that the alarm output remains
in effect after alarm occurs.
Loading ...
Loading ...
Loading ...