Loading ...
Loading ...
Loading ...
Thermal Network Bullet Camera User Manual
76
the defective pixels on the LCD which are not performing as expected.
Note: This function is only available to certain camera models.
Steps:
1. Enter the DPC Settings interface: Configuration > Image > DPC
Figure 8-6 Defective Pixel Correction
2. Select the mode. The following takes manual mode as an example.
3. Click on the image to select the defective pixel. The cursor on the image will
move to the clicked position. You can click to slightly adjust the cursor
position.
4. Click to start correction.
5. Click to cancel the correction, or click to save.
Loading ...
Loading ...
Loading ...