Loading ...
Loading ...
Loading ...
Thermal Network Bullet Camera User Manual
106
Manual Temperature Measurement/
Auto Temperature Measurement?
Start
Manual
Temperature
Measurement
Auto Temperature
Measurement
Install and Open the
Client Software
Select Expert Mode
Draw the shape and set the rules.
YES
END
NO
Set the VCA resource to
Fire Detection
Set the Temperature
Measurement Parameters
Enable the Manual Temperature
Measurement
Click on the live view to
get the temperature.
If you need to set rules (e.g., areas) for
temperature measurement?
YES
NO
Select Normal Mode
Set Alarm Parameters.
If the PTZ function is supported by the
camera?
Pan/tilt the camera to set other rules.
Set areas comparison.
Purpose:
This function is used for measuring the temperature of detected spot and the device
compares temperature of selected regions and alarms.
Steps:
(For Normal Mode)
1. Enter Configuration > Temperature Measurement > Advanced Settings.
2. Select the configuration mode as Normal.
3. Configure the parameters.
Emissivity: Set the emissivity of your target. Note: The emissivity of each
object is different.
Distance (m): The straight-line distance between the target and the device.
Pre-Alarm: When the temperature of target exceeds the Pre-Alarm
Threshold, and this status keeps NOT shorter than the Filtering Time, it
Loading ...
Loading ...
Loading ...