Loading ...
Loading ...
Loading ...
Thermal Network Bullet Camera User Manual
107
triggers the Pre-Alarm.
Check the checkbox of Pre-Alarm Output to set link the pre-alarm with the
connected alarm device.
Alarm: When the temperature of target exceeds the Alarm Threshold, and
this status keeps NOT shorter than the Filtering Time, it triggers the Alarm.
Check the checkbox of Alarm Output to set link the pre-alarm with the
connected alarm device.
4. Click Save.
Figure 9-22 Temperature Measurement Configuration
(For Expert Mode)
1. Enter Configuration > Temperature Measurement > Advanced Settings.
2. Select the configuration mode as Expert.
3. Configure the parameters.
Name: You can customize the rule name.
Type: Select Point, Line, or Area as rule type.
Emissivity: Set the emissivity of your target. The emissivity of each object is
different, you can refer to the Appendix for details.
Distance (m): The straight-line distance between the target and the device.
Loading ...
Loading ...
Loading ...