Loading ...
Loading ...
Loading ...
Thermal Network Bullet Camera User Manual
99
9.3.3 Configuring Shield Region
The shield region allows you to set the specific region in which the perimeter
protection will not function. Up to 4 shield regions are supported.
Steps:
1. Enter Configuration > VCA > Shield Region.
2. Click Shield Region tab to enter the shield region configuration interface.
3. Click the hexagons sign to draw shield area by left click end-points in
the live view window, and right click to finish the area drawing.
Notes:
Polygon area with up to 10 sides is supported.
Click to delete the drawn areas.
If live view is stopped, there is no way to draw the shield regions.
4. Click Save to save the settings.
9.3.4 Configuring Rule
The perimeter protection supports a series of behaviors, including line crossing
detection, intrusion, region entrance, and region exiting, etc.
Note: Please refer to each chapter for detailed information of each behavior.
Steps:
1. Enter Configuration > VCA > Rule.
2. Click Rule Tab to enter the rule configuration interface.
3. Check the checkbox of the single rule to enable the rule for perimeter
protection.
4. Select the rule type, set the filter type, and then draw the line/area on the live
video for the single rule.
Loading ...
Loading ...
Loading ...