Loading ...
Loading ...
Loading ...
Thermal Network Bullet Camera User Manual
85
Steps:
1. Enter the video tampering Settings interface, Configuration > Event > Basic
Event > Video Tampering.
Figure 9-7 Video Tampering Alarm
2. Check Enable Video Tampering checkbox to enable the video tampering
detection.
3. Set the video tampering area. Refer to Task 1: Set the Motion Detection Area in
Section 9.1.1.
4. Click Edit to edit the arming schedule for video tampering. The arming schedule
configuration is the same as the setting of the arming schedule for motion
detection. Refer to Task 2: Set the Arming Schedule for Motion Detection in
Section 9.1.1.
5. Check the checkbox to select the linkage method taken for the video tampering.
Loading ...
Loading ...
Loading ...