Loading ...
Loading ...
Loading ...
Thermal Network Bullet Camera User Manual
95
You can enable to display the VCA information on stream or target information on
alarm picture and set the snapshot quality and resolution.
Steps:
1. Enter Configuration > VCA > Basic Settings > Overlay & Capture.
2. Check the checkbox to enable the Intelligent Analysis. And you can view the
current version for the perimeter protection.
3. Check the desired checkbox of display settings and select the snapshot quality and
resolution.
Figure 9-15 Overlay & Capture
Display information includes the display on picture and display on stream.
Display VCA info. on Stream: The green frames will be displayed on the target
if in a live view or playback.
Display Trajectory: Check to enable the trajectory display. The target's moving
trajectory will be shown in the live view.
Display Target info. on Alarm Picture: There will be a frame on the target on
the uploaded alarm picture if the checkbox is checked.
Display Rule info. on Alarm Picture: The captured target and the configured
area will be framed on the alarm picture.
Note: Make sure the rules are enabled in your local settings. Go to
Loading ...
Loading ...
Loading ...