Loading ...
Loading ...
Loading ...
6 Installation
B. If the battery total input/output current more than 100A in parallel, the
wiring method should configure bus-bars to connect the power cables.
Figure 6-4 Connect the Battery Pack Power Cable to Bus-bars
6.4.2 Communication Cable Connection
Use the communication cable to connect the battery packs in series through
the RS485/CAN communication port, and connect the battery packs at the end to
the external device BMS port. The communication cable pins refer to“Table 5-6
RJ45 Definition”.
Figure 6-5 Connect RS485/CAN Communication Cable
Bus
-Bars
Power out-
Power out+
external device
Loading ...
Loading ...
Loading ...