FLUKE 2062 User Manual for the Fluke 2062 Advanced Pro Wire Tracer Kit, CAT IV 600 V, 600 V AC/DC

Loading ...

2052R/2062R/2000T

Users Manual

Map a Circuit

Use test leads or the Clamp to map a de-energized circuit. Use the Clamp to map an energized

circuit.

Te s t Le a d s

To use test leads to map a de-energized circuit:

1. Turn off the breaker or fuse.

2. Connect the Transmitter. See Figure 23.

3. On the Receiver, select tip sensor mode.

4. Scan the face plates of receptacles and wires towards the load with the tip sensor of the

Receiver.

The receptacles and loads that are connected to the breaker or fuse show a strong signal

on the Receiver.

The Clamp

To use the Clamp to map an energized or de-energized circuit:

1. Connect the Clamp around the wire at the breaker or fuse panel. See Figure 24.

2. On the Receiver, select tip sensor mode.

3. Scan the face plates of receptacles and wires towards the load with the tip sensor of the

Receiver.

The receptacles and loads that are connected to the breaker or fuse show a strong signal

on the Receiver.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 2062 Advanced Pro Wire Tracer Kit, CAT IV 600 V, 600 V AC/DC