Loading ...
Loading ...
Loading ...
Wire Tracer Receiver and Transmitter
Special Applications
31
To find the location of a broken wire located behind walls, floors, or ceilings:
1. De-energize the wire.
2. Connect the Transmitter to the circuit. See Figure 18.
a. Connect the red test lead to the circuit.
b. Connect the black stackable test lead to the Transmitter.
c. Connect one end of the green test lead to the black test lead and the other end to a
separate ground.
d. Connect additional test leads as needed to ground all unused de-energized wires on
the Transmitter side of the circuit that run in parallel with the black test lead.
Figure 18. Trace a Broken Wire
3. On the Receiver, select Smart Sensor mode or tip sensor mode.
4. Trace the wire until the signal stops.
5. Mark the location where the signal stops.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...