FLUKE 2062 User Manual for the Fluke 2062 Advanced Pro Wire Tracer Kit, CAT IV 600 V, 600 V AC/DC

Loading ...

2052R/2062R/2000T

Users Manual

Find a Wire in a Bundle

To identify a wire in a bundle, first determine if the wire is on an energized or de-energized

circuit.

De-energized Circuit

To identify a wire in a bundle in a de-energized circuit:

1. Connect the Transmitter. See Figure 21.

a. Connect the red test lead to the circuit.

b. Connect the black stackable test lead to the Transmitter.

c. Connect one end of the green test lead to the black test lead and the other end to a

separate ground.

d. Connect additional test leads as needed to ground all unused de-energized wires on

the Transmitter side of the circuit that run in parallel with the black test lead.

2. On the Receiver, select tip sensor mode.

3. Pull one wire out as far as possible from other wires in the bundle and touch it with the tip

sensor. The strongest signal indicates the proper wire in the bundle.

Figure 21. Trace a Bundled Wire in a De-energized Circuit

<1 s

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 2062 Advanced Pro Wire Tracer Kit, CAT IV 600 V, 600 V AC/DC