Loading ...
Loading ...
Loading ...
Wire Tracer Receiver and Transmitter
Special Applications
37
Energized Circuit
To identify a wire in a bundle in an energized circuit:
1. Connect the Transmitter. See Figure 21.
a. Connect the red test lead to the circuit.
b. Connect the green test lead to a separate ground.
2. On the Receiver, select tip sensor mode.
3. Pull one wire out as far as possible from other wires in the bundle and touch it with the tip
sensor. The strongest signal indicates the proper wire in the bundle.
Figure 22. Trace a Bundled Wire in an Energized Circuit
<1 s
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...