FLUKE 9100S-D-156 User Manual for the Fluke 9100S-D-156 Dry Block Calibrator with Block D

Loading ...

9100S Dry-Well Calibrator

Set-point Resistance

6.3.1 Scan Control

The scan is controlled with the scan on/off function that appears in the main menu

after the temperature scale units.

Sc Scashesforonesecondandthenthecurrentscansetting

isdisplayed

Off Scanfunctionoff

Press the up or down arrow to toggle the scan on or off.

On Scanfunctionon

Press “SET” to accept the present setting and continue.

 Acceptscansetting

6.3.2 Scan Rate

The scan rate can be set from 0.1 to 99.9°C/min. The maximum scan rate, however,

is actually limited by the natural heating or cooling rate of the instrument. This rate is

often less than 100°C/min, especially when cooling.

The scan rate function appears in the main menu after the scan control function. The

scan rate units are in degrees Celsius per minute, regardless of the selected units.

Sr Srashesforonesecondandthenthecurrentscanrate

settingisdisplayed

0.1 Scanratein°C/min

Press the up or down arrow to change the scan rate.

2.0 Newscanrate

Press “SET” to accept the new scan rate and continue.

 Acceptscanrate

6.4 Set-point Resistance

This set-point resistance is used in the calibration calculation of the instrument and

is not adjustable. Once the desired temperature has been reached and the controller

is stable, the set-point resistance can be displayed by pressing “SET” and d

simultaneously. The set-point resistance is displayed as follows.

SrES SrES ashesfortwosecondsandthenthewholenumber

ofthecurrentset-pointresistancesettingisdisplayed

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 9100S-D-156 Dry Block Calibrator with Block D