FLUKE 9100S-D-156 User Manual for the Fluke 9100S-D-156 Dry Block Calibrator with Block D

Loading ...

Parts and Controls

Rear Panel

4 Parts and Controls

The user should become familiar with the dry-well calibrator and its parts: (See

Figures 1, 2, and 3).

4.1 Rear Panel

Power Cord - The removable power cord, (Figure 1 on this page) attaches to the back

side of the instrument. It plugs into a standard 115 VAC (optional 230 VAC) grounded

socket.

Figure 1 Back Panel

Power Switch - The power switch is located on the back panel of the instrument. The

switch is either on or off. The on position is for normal operation. The off position

disconnects power to the entire unit.

Fan - The fan inside the instrument runs continuously when the unit is being operated

to provide cooling to the instrument. The fan has two speeds, a slow speed for control

operation and a faster speed for rapid cooling. Slots at the top and around the corners

of the instrument are provided for airow. The area around the calibrator must be kept

clear to allow adequate ventilation. The air is directed from the back to the front and

may be hot. Allow 6 inches of open space around the calibrator to allow adequate

ventilation.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 9100S-D-156 Dry Block Calibrator with Block D