FLUKE 9100S-D-156 User Manual for the Fluke 9100S-D-156 Dry Block Calibrator with Block D

Loading ...

9100S Dry-Well Calibrator

Constant Temperature Block Assembly

the temperature of the block. The entire assembly is suspended in an air cooled

chamber thermally isolated from the chassis and electronics.

WARNING: The opening in front of the block may be very hot due to air

blowing forward.

The constant temperature block is available in the following congurations.

Block “A” has six holes, four that accept probe diameters of 1/4”, 5/32”, 1/8”, and

1/16”, and two that accept probes of 3/16” diameter to allow comparison calibrations.

Block “B” has four holes that accept probe diameters of 3/8”, 1/4”, 3/16” and 1/8”.

Block “C” has two holes that accept probe diameters of 3/16” and 1/2”.

Block “D” has six holes, two that accept probe diameter of 3 mm, two that accept

probes of 4 mm diameter, and two that accept probes of 6 mm diameter.

Surrounding the well opening are small ventilation holes which provide cooling to the

instrument.

Figure 4

1/16" (1.6 mm)

3/16" (4.8 mm) 3/16" (4.8 mm)

1/8" (3.2 mm)

5/32" (4 mm)

1/4" (6.4 mm)

Block “A”

9100S Fixed-Block Options

3/16" (4.8 mm)

1/8" (3.2 mm)

1/4" (6.4 mm)

3/8" (9.5 mm)

Block “B”

3/16" (4.8 mm)

1/2" (12.7 mm)

Block “C”

6 mm

Block “D”

4 mm

6 mm

3 mm

4 mm

Fixed block options

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 9100S-D-156 Dry Block Calibrator with Block D