Loading ...
Loading ...
Loading ...
Card Reader Descripon
Get card reader descripon. It is read-only.
Enable Card Reader
Enable the card reader's funcon.
Authencaon
Select an authencaon mode according to your actual needs from the drop-down list.
Authencaon Interval
You can set the
authencaon interval of the same person when authencang. The same
person can only authencate once in the congured interval. A second authencaon will be
failed.
Max. Authencaon Failed Aempts Alarm/Alarm of Max. Failed Aempts
Enable to report alarm when the card reading aempts reach the set value.
Enable Tampering Detecon
Enable the an-tamper detecon for the card reader.
Enable Card No. Reversing
The card No. will be in reverse sequence aer enabling the funcon.
QR Code
Enable the funcon and the user can use QR code to open the door.
Note
●
Disable the IR light if enabling the QR code funcon. For details, see Set Image
Parameters . The picture in low illuminaon environment may be aected due to disabling
the IR light.
●
Set QR code
funcon via HCC or HCEC, you should select compable to 1.0 or 2.0. 2.0 is
recommended.
Set Door Parameters
Tap → Access Control → Door Parameters .
DS-K1T502 Series Access Control Terminal User Manual
66
Loading ...
Loading ...
Loading ...