Rigol DS1104Z-S-PLUS DS1000Z user manual

Loading ...

Chapter 2 To Set the Vertical System RIGOL

DS1000Z User Guide 2-5

and "Fine" adjustments.

When changing the vertical scale of the analog channel by rotating VERTICAL

SCALE, you can select to expand or compress the waveform around the "Center" or

"Ground". For more details, please refer to the introduction in "

Vertical

Reference".

Amplitude Unit

Select the amplitude display unit for the current channel. The available units are W, A,

V and U. When the unit is changed, the unit displayed in the channel label will

change accordingly.

Press CH1  Unit to select the desired unit and the default is V.

Channel Label

The instrument uses the number of the channel to mark the corresponding channel

by default. For ease of use, you can also set a label for each channel, for example,

" ". Press CH1  Label to enter the label setting menu. You can use the

built-in label or manually input a label. Manual input does not support the Chinese

input, and the length of the label cannot exceed 4 characters.

Press Display to turn on or off the channel label display. The default is CH1 when

the channel label display is enabled.

Press Template to select the preset labels such as CH1, ACK, ADDR, BIT, CLK, CS,

DATA, IN, MISO, MOSI, OUT, RX and TX, etc.

Press Label Edit and the label editing interface is automatically displayed as shown

in the figure below. You can input the label manually.

Figure 2-2 Label Editing Interface

For example, set the label to " ". Press Keyboard to select the "Keyboard" area.

Name Input Area Keyboard Upper/Lower Case Switch

Loading ...

Rigol DS1104Z-S-PLUS DS1104Z-S+ oscilloscope