Rigol DS1104Z-S-PLUS DS1000Z user manual

Loading ...

Chapter 6 MATH and Measurement RIGOL

DS1000Z User Guide 6-15

disable waveform invert, etc.

― Press Start and use to set the start point of the operation results.

― Press End and use to set the end point of the operation results.

― Press Invert to enable or disable the inverted display function of the

waveform.

― Press Sens. and use to set the sensitivity of the digital signal converted

from the analog signal on the source. The setting range is from 0 Div to

0.96 Div.

― Press Auto Scale to enable or disable the auto scale function. When auto

scale is enabled, the instrument will adjust the vertical scale of the

operation results to the optimal value according to the current

configuration.

Note: Smooth is grayed out and disabled. It is only available for differential

operation.

 You can also use HORIZONTAL POSITION and HORIZONTAL

SCALE to adjust the horizontal position and scale of the operation results.

Intg

Calculate the integral of the selected source. You can use integral to measure the

area under a waveform or the pulse energy.

Press MATH  Math  Operator to select "Intg":

 Press Operation to enable or disable the "Intg" operation function.

 Press Source to select the desired channel (CH1, CH2, CH3, CH4 or fx (please

refer to the introduction in "

Fx Operation")).

 Press Offset and use to adjust the vertical position of the operation results.

 Press Scale and use to adjust the vertical scale of the operation results.

 Press Scale Reset to adjust the vertical scale of the operation results to the

optimal value according to the current configuration.

 Press Options to set the start and end points of the operation results, enable or