190-204/AM/S User Manual for the Fluke 190-204/AM/S ScopeMeter Test Tool with SCC-290 kit, 200 MHz, 4 channels

Loading ...

Using the Scope and Meter

Making Automatic Meter Measurements (for models 190-xx4)

Making Automatic Meter Measurements

(for models 190-xx4)

The test tool offers a wide range of automatic meter

measurements. You can display four large numeric

readings: READING 1 … 4. These readings are selectable

independently, and the measurements can be done on the

input A, B, C or input D waveform. In METER mode the

waveforms are not displayed. The 20 kHz HF rejection

filter (see Working with Noisy Waveforms on page 27)

is always on in the METER mode.

Selecting a Meter Measurement

To choose a current measurement for input A, do the

following:

METER

Display the METER key labels.

Open the Reading .. menu.

Select the reading number to be

displayed, for example READING 1

ENTER

Select on A. Observe that the

highlight jumps to the present

measurement.

ENTER

Select the A dc… measurement.

ENTER

Select a current probe sensitivity

that matches the connected

current probe (see Adjusting the

Probe Type Settings on page 16.)

You will see a screen like in Figure 12.

Figure 12. Meter Screen

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct

.com

Loading ...

FLUKE 190-204/AM/S ScopeMeter Test Tool with SCC-290 kit, 200 MHz, 4 channels