Hikvision DS-2DE4215IW-DES5 User Manual

Loading ...

Scan the QR code on camera body or on the Quick Start Guide cover.

Note

If the QR code is missing or too blur to be recognized, you can also add the camera by inpung

the camera's serial number.

Input the vericaon code of your camera.

Note

●

The required vericaon code is the code you create or change when you enable Hik-Connect

service on the camera.

●

If you forget the vericaon code, you can check the current vericaon code on Plaorm

Access conguraon page via web browser.

Tap Connect to a Network buon in the popup interface.

Choose Wired Connecon or Wireless Connecon according to your camera funcon.

Wireless

Connecon

Input the Wi-Fi password that your mobile phone has connected to, and

tap Next to start the Wi-Fi connecon process. (Locate the camera within 3

meters from the router when seng up the Wi-Fi.)

Wired

Connecon

Connect the camera to the router with a network cable and tap Connected

in the result interface.

Note

The router should be the same one which your mobile phone has connected to.

Tap Add in the next interface to nish adding.

For detailed informaon, refer to the user manual of the Hik-Connect app.

10.8 Set ISUP

When the device is registered on ISUP plaorm (formerly called Ehome), you can visit and manage

the device, transmit data, and forward alarm informaon over public network.

Steps

Go to Conguraon → Network → Advanced Sengs → Plaorm Access .

Select ISUP as the plaorm access mode.

Select Enable.

Select a protocol version and input related parameters.

Click Save.

Network Speed Dome User Manual

Loading ...

Hikvision DS-2DE4215IW-DES5 4-inch 2 MP 15X Powered by DarkFighter IR Network Speed Dome