Hikvision DS-2DE4215IW-DES5 User Manual

Loading ...

And you also need to use the dierent version according to the security level required. SNMP v1

is not secure and SNMP v2 requires password for access. And SNMP v3 provides encrypon and

if you use the third version, HTTPS protocol must be enabled.

Congure the SNMP sengs.

Click Save.

10.5 Access to Device via Domain Name

You can use the Dynamic DNS (DDNS) for network access. The dynamic IP address of the device can

be mapped to a domain name resoluon server to realize the network access via domain name.

Before You Start

Registraon on the DDNS server is required before conguring the DDNS sengs of the device.

Steps

Refer to TCP/IP to set DNS parameters.

Go to the DDNS sengs page: Conguraon → Network → Basic Sengs → DDNS .

Check Enable DDNS and select DDNS type.

DynDNS

Dynamic DNS server is used for domain name resoluon.

NO-IP

NO-IP server is used for domain name resoluon.

Input the domain name informaon, and click Save.

Check the device ports and complete port mapping. Refer to Port to check the device port , and

refer to Port Mapping for port mapping sengs.

Access the device.

By Browsers Enter the domain name in the browser address bar to access the device.

By Client Soware Add domain name to the client soware. Refer to the client manual for

specic adding methods.

10.6 Access to Device via PPPoE Dial Up Connecon

This device supports the PPPoE auto dial-up funcon. The device gets a public IP address by ADSL

dial-up aer the device is connected to a modem. You need to congure the PPPoE parameters of

the device.

Steps

Go to Conguraon → Network → Basic Sengs → PPPoE .

Check Enable PPPoE.

Set the PPPoE parameters.

Dynamic IP

Network Speed Dome User Manual

Loading ...

Hikvision DS-2DE4215IW-DES5 4-inch 2 MP 15X Powered by DarkFighter IR Network Speed Dome