Hikvision DS-K1T502DBWX User Manual

Loading ...

The door contact can be enabled with appropriate delay aer person with extended access

needs swipes her/his card.

Door Remain Open Duraon with First Person

Set the door open duraon when rst person is in. Aer the rst person is authorized, it allows

mulple persons access the door or other authencaon acons.

Duress Code

The door can open by

inpung the duress code when there is duress. At the same me, the

client can report the duress event.

Super Password

The specic person can open the door by inpung the super password.

Note

The duress code and the super code should be dierent.

Set Terminal Parameters

You can set terminal parameters for accessing.

Click

Conguraon → Access Control → Terminal Parameters .

You can set Working Mode as Access Control Mode. The access control mode is the device normal

mode. You should

authencate your credenal for accessing.

Click Save to save the sengs aer the conguraon.

Set RS-485 Parameters

You can set the RS-485 parameters including the peripheral, address, baud rate, etc.

Click Conguraon → Access Control → RS-485 .

Check Enable, and set the parameters.

Peripheral Type

Select a peripheral from the drop-down list according the actual

situaon. You can select from

Card Reader, Extension Module, or Access Controller.

Note

Aer the peripheral is changed and saved, the device will reboot automacally.

RS-485 Address

Set the RS-485 Address according to your actual needs.

DS-K1T502 Series Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T502DBWX Access Control Terminal