Hikvision DS-K1T502DBWX User Manual

Loading ...

Chapter 5 Identy Authencaon

Aer network conguraon, system parameters conguraon and user conguraon, you can go

back to the

inial page for identy authencaon. The system will authencate person according

to the congured authencaon mode.

5.1 Authencate via Single Credenal

Set the user authencaon type before authencaon. For details, see Set Authencaon

Parameters .

Authencate ngerprint, card, PIN, or QR code.

Fingerprint

Place the enrolled

ngerprint on the ngerprint module and start authencaon via ngerprint.

Card

Present the card on the card presenng area and start authencaon via card.

Note

The card can be normal IC card, or encrypted card.

QR Code

Put the QR code in front of the device camera to

authencate via QR code.

Note

Authencaon via QR code should be supported by the device.

Enter the PIN to

authencate via PIN.

authencaon completed, a prompt "Authencated" will pop up.

5.2

Authencate via Mulple Credenal

Before You Start

Set the user

authencaon type before authencaon. For details, see Set Authencaon

Parameters .

Steps

Authencate any credenal according to the instrucons on the live view page.

DS-K1T502 Series Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T502DBWX Access Control Terminal