SP-1 User Manual

Loading ...

4. The machine searches for your network and displays a list of available SSIDs. Press a or b to display the [<New

SSID>] option, and then press it.

5. Press [OK].

6. Enter the SSID name, and then press [OK].

7. Select the Authentication Method, and then press it.

8. Do one of the following:

• If you selected the [EAP-FAST], [PEAP] or [EAP-TTLS] option, select the Inner Authentication method

[NONE], [CHAP], [MS-CHAP], [MS-CHAPv2], [GTC] or [PAP].

Select the encryption type [TKIP+AES] or [AES].

Select the verification method [No Verification], [CA] or [CA + Server ID].

- If you selected the [CA + Server ID] option, enter the server ID, user ID and password (if required),

and then press [OK] for each option.

- For other selections, enter the user ID and Password, and then press [OK] for each option.

• If you selected the [EAP-TLS] option, select the encryption type [TKIP+AES] or [AES].

The machine will display a list of available Client Certificates, and then select the certificate.

Select the verification method [No Verification], [CA] or [CA + Server ID].

- If you selected the [CA + Server ID] option, enter the server ID and user ID, and then press [OK] for

each option.

- For other selections, enter the user ID, and then press [OK].

9. The machine attempts to connect to the wireless device you have selected.

If your wireless device is connected successfully, the LCD displays [Connected].

You have completed the wireless network setup. To install the drivers or your application necessary for operating

your device, go to your model's Downloads page at https://s.brother/ca2ab/

For more information about how to enter text, see Related Information.

Depending on your Authentication method, the Inner Authentication method selections differ.

If you have not imported a CA certificate into your machine, the machine displays [No Verification].

Related Information

• Use the Wireless Network

Brother SP-1 Sublimation Printer