Loading ...
Loading ...
Loading ...
Vandal Proof IP Dome (Part IV)
73
4
F. To optionally install a pipe, use one of the two methods illustrated
below depending on the type of the back plate that comes with
your camera:
If your plate comes with two knobs (as in Figure 4-18),
install the supplied conduit converter, with the PG21 conduit
connector and a self-prepared 1/2" conduit pipe, to the back
plate.
Conduit
Converter
Plastic PG21 Conduit
Connector
Conduit
Pipe
Figure 4-18
If your plate comes without knobs, install the supplied
conduit connector kit and a self-prepared 1/2" conduit pipe,
to the camera after all the wires are threaded.
Conduit pipe
Conduit converter
Plastic PG21
conduit connector
Figure 4-19
Note:
When installed with a pipe, it is required to supply power through a
PoE adapter because the power adapter wire does not fit in a 1/2” pipe.
You will have to purchase your own PG21 conduit connector if you want
to use 3/4” or 1” pipe.
A metal PG21 conduit connector can be
purchased upon request, which can be connected to a 3/4” pipe.
Loading ...
Loading ...
Loading ...