Loading ...
Loading ...
Loading ...
68
3.2 mm: Audio
1.9 mm: DIDO
Figure 4-10
IMPORTANT:
1. Use the supplied ruler and leave at least 14 cm of I/O wires
and 10 cm of audio wires between their connectors on the
camera and the cable gland.
2. The plugs are used to prevent water from entering the
camera housing. Keep the unused holes plugged and save
the removed plugs for future use.
3. Only thread the wires through their designated holes on the
conduit connector to make sure the wires are properly sealed.
If you use cat 6 Ethernet cable, you need to thread the DC 12V
wires through the conduit connector. Followings are the
corresponding holes.
Loading ...
Loading ...
Loading ...