Loading ...
Loading ...
Loading ...
Vandal Proof IP Dome (Part I)
19
1
1.5.2 Directly on the Camera
1. Keep the power and network cables (or PoE) connected to the camera.
2. Use a pin to press and hold the
default button on the inner housing.
3. Release the
default button when the status LED blinks. This shall
take about 8 seconds.
4. When the
status LED fades, the process of loading default settings is
completed and the camera reboots automatically.
Status LED
Default button
Figure 1-18
5. Insert a new Silica Gel Bag and fasten the camera’s cover
immediately.
Loading ...
Loading ...
Loading ...