Loading ...
Loading ...
Loading ...
Target Vandal Proof IP Dome
87
5
For users of DC 12V, change the 1a connector to the
supplied Waterproof rubber set (1c). Remove the terminal
block from the power adapter and thread the adapter wire
through the rubber.
F
or a
d
ap
t
er w
i
re
For Ethernet cable
For Cat.5 Ethernet
cable (PoE)
For Cat.6 Ethernet
cable (PoE)
1a 1b 1c
Figure 5-7
E. Thread the Ethernet cable and/or the adapter wire through part 2
and 3 of the connector.
Figure 5-8
IMPORTANT: Use the supplied ruler and leave about 14 cm of the
Ethernet cable and 10 cm of the adapter wire between their connectors
on the camera and the cable gland.
F. Re-install the cap (part 3) with the supplied big concave hexagon
wrench. Make sure the cap is installed tightly to waterproof the
camera.
Loading ...
Loading ...
Loading ...