Loading ...
Loading ...
Loading ...
70
B. Thread an Ethernet cable (the end with no RJ-45 connector) and
the optional power adapter wires from the back panel through the
cable gland
Figure 4-13
IMPORTANT: Use the supplied ruler and leave about 14 cm of the
Ethernet cable between the connector on the camera and the cable
gland.
C. Re-install the cap. Make sure the cap is installed tightly to
waterproof the camera.
5. Connect the wires to the camera.
A. Install the terminal blocks to the power adapter and I/O devices.
See 4.4 Connecting the Camera and 4.5 I/O Connector.
B. Install the supplied RJ-45 connector to the Ethernet cable.
C. Plug all the connectors to the camera panel.
D. Arrange the wires in the conduit connector and re-install it to the
camera.
Loading ...
Loading ...
Loading ...