Loading ...
Loading ...
Loading ...
IMPORTANT:
1. If or is enabled, you need to
erver
ra is installed in the LAN, use the
2.1 Checking the Dynamic IP Address. If your camera
mera’s changing IP address first. For details, see
LAN Configuration and Advanced TCP/IP sections,
Administrator Mode Chapter in the GV-IPCAM Firmware
Manual.
2. If Dynamic IP Address or PPPoE is enabled and you cannot
access the camera, you may have to reset the camera to its
factory default and then perform the network settings again.
To restore factory settings, see 1.5 Loading Factory Default.
Dynamic IP Address PPPoE
know which IP address the camera will get from DHCP s
or ISP to log in. If your came
GV-IP Device Utility to look up its current dynamic IP address.
See 6.
uses a public dynamic IP address via PPPoE, use the
dynamic DNS Service to obtain a domain name that is linked
to the ca
102
Loading ...
Loading ...
Loading ...