Loading ...
Loading ...
Loading ...
Vandal Proof IP Dome (Part IV)
67
4
B. Unplug the conduit connector inside the housing and disintegrate
the connector. You should have 3 parts:
Figure 4-8
C. Thread the audio wires and I/O wires through the conduit entry
and then through part 1, 2, and 3 of the conduit connector.
Tip:
1. To make the threading easier, it is advised to thread the wires
in the order described here.
2. Use a pair of pliers to help you pull the wires through the
camera.
For part 1, there are 5 holes each labeled with its diameter.
Remove the plugs and push the wires to the corresponding hole
listed below:
Plug
Figure 4-9
Loading ...
Loading ...
Loading ...