Loading ...
Loading ...
Loading ...
en-us Cleaning and maintenance
28
8. Hold the brewing unit by the handle.
‒ Push the red lever up.
‒ Position the brewing unit under
the lever and slide it back as far
as it will go.
a The lever will click into place.
9. Insert the drip tray with the coffee
dregs container.
10.Close the brewing chamber door.
Note:The door can only be closed if
the brewing unit and drip tray are
inserted correctly.
11.7 Service programs
The
button lights up and
the display shows "Calc'nClean re-
quired!" depending on the water
hardness and use of your appliance.
Use the program to descale and clean
your appliance.
NOTICE:
Improper cleaning and descaling or a
delay in doing so may damage the
appliance.
▶ Immediately perform calc'nClean
according to the instructions.
▶ Only put cleaning tablets in the shaft
of the brewing unit.
▶ Do not put descaling tablets or other
products in the shaft of the brewing
unit.
Notes
¡ If you do not descale and clean the
appliance in good time, it will locked
and the display shows "Device
locked".
¡ To unlock the appliance, run the
service program.
Tip:Before starting the service
program, remove, clean and reinsert
the brewing unit. Clean the milk
frother.
Starting Calc'nClean
The process takes approx.40minutes.
1. Press and hold
button
for at least 5seconds.
a symbol lights up.
2. Open the door.
Loading ...
Loading ...
Loading ...