Loading ...
Loading ...
Loading ...
en-us Basic Operation
18
¡ The grinder has been factory-set for
optimum operation. If coffee is only
dispensed drop by drop or is too
thin and with too little crema, you
can adjust the grinding level when
the grinder is running.
→
"Setting the grinding level",
Page21
¡ During operation water droplets may
form at the ventilation slits.
¡ If you do not perform any actions on
the appliance for a certain period, it
will automatically switch off. You
can change the duration in the basic
settings.
¡ For technical reasons steam can
escape from the appliance.
¡ When you press a button, a signal
tone sounds. You can switch off the
signal tone in the basic settings.
Tip:Before using your appliance,
check and set the water hardness.
Note
The first beverage will not yet have its
full aroma if:
¡ You are using the appliance for the
first time.
¡ You have run a machine care cycle.
¡ You have not used the appliance for
a long time.
Tip:You will get a stable, fine-pored
crema after you have started up your
appliance and dispensed a few cups.
Basic Operation
7 Basic Operation
Basic Operation
7.1 Switching the appliance
on or off
▶ Press
.
When the appliance is switched on
or off, it will rinse itself
automatically. When switched off,
the appliance will emit steam into
the drip tray for cleaning. The
appliance will not rinse itself if the
appliance is still warm when
switched on or if no beverage was
dispensed before it was switched
off.
7.2 Dispensing beverages
Find out how to prepare a drink of your
choice.
WARNING
Freshly prepared beverages are very
hot.
▶ Let drinks cool down if necessary.
▶ Do not let escaping liquids or steam
come into contact with your skin.
7.3 Dispensing a coffee drink
made from fresh beans
1. Place a cup under the outlet
system.
2. To set the coffee strength, press
button repeatedly.
Loading ...
Loading ...
Loading ...