Loading ...
Loading ...
Loading ...
en-us Before using for the first time
16
2. Allow the water to drain off the test
strip.
3. Read the water hardness off the test
strip after 1minute.
→
"Overview of water hardness lev-
els", Page16
Note:Please use the test strip even if
you have a water softening system
installed as they generate different
water hardnesses.
Tips
¡ You can change the settings at any
time.
→
"Basic settings", Page22
¡ If the water hardness is higher than
21.9gr/gal (US), you can fill the
water tank with prefiltered water to
reduce limescale deposits in the
water tank.
6.4 Overview of water hardness levels
The table shows allocation of the levels to the different degrees of water hardness.
Level Ring setting on
INTENZA filter
1
Degree of
German hardness
in °dH
Water hardness
in gr/gal (US)
1 A 1 - 7 < 7.3
2 A 8 - 14 7.3 - 14.6
3 B 15 - 21 14.6 - 21.9
4
2
C 22 - 30 > 21.9
1
For more information see leaflet "INTENZA filter".
2
Factory setting
6.5 Water filter
You can use a water filter to minimize
limescale deposits and reduce
impurities in the water.
Inserting or replacing a water filter
If you have to change the inserted
water filter,
lights up on the
display.
NOTICE:
Possible damage to the appliance due
to limescale build-up.
▶ Change the water filter at the
correct time.
▶ Change the water filter after
2months at the latest.
▶ Observe the display messages.
Requirement:The appliance is
switched on.
1. Press and hold
and
buttons simultaneously for at least
3seconds.
2. Press
button until the
display shows "W. hardness".
3. Confirm with "ok" button
.
4. Press
button until the
display shows "Water filter".
5. Confirm with "ok" button
.
a The display shows "Filter act.".
Loading ...
Loading ...
Loading ...