Loading ...
Loading ...
Loading ...
Steps
Note
Parts of the device models supports funcon. Refers to the actual device for details.
1.
Click Conguraon → Network → Device Access → Hik-Connect to enter the sengs page.
Note
Hik-Connect is an applicaon for mobile devices. With the App, you can view live image of the
device, receive alarm nocaon and so on.
2.
Check Enable to enable the funcon.
3.
Oponal: Check the checkbox of Custom, and you can set the server address by yourself.
4.
Enter the vericaon code.
5.
Check Enable to enable video encrypon. Set the video encrypon password and conrm
password.
6.
Click More and enable Allow Accessbehind Wired Network to adjust the network priority.
7.
Click View to view device QR code. Scan the QR code to bind the account.
Note
8 to 32 leers (a to z, A to Z) or numbers (0 to 9), case sensive. You are recommended to use a
combinaon of no less than 8 leers or numbers.
8.
Click Save to enable the sengs.
Set ISUP Parameters
Set the ISUP parameters for accessing device via ISUP protocol.
Steps
Note
The funcon should be supported by the device.
1.
Click Conguraon → Network → Device Access → ISUP .
2.
Check Enable.
3.
Select the ISUP version and Server IP Address, Port, Device ID, and you can view the Register
status.
Note
If you select 5.0 as the version, you should set the Encrypon Key and Network Connecon
Priority as well. You can click More and check WLAN or Wired Network to adjust the network
priority.
4.
Set the ISUP listening parameters, including ISUP alarm center IP address/domain name, ISUP
alarm center URL, and ISUP alarm center port.
Face Recognion Terminal User Manual
76
Loading ...
Loading ...
Loading ...