Hikvision DS-K1T642MW User Manual

Loading ...

Check Wi-Fi.

Select a Wi-Fi

Click Connect of a Wi-Fi in the list and enter the password.

Click Manual Add and enter SSID and select the security mode. Click OK. Click Connect.

Oponal: Set the WLAN parameters.

1) Set the IP address, subnet mask, default gateway and DNS server address. Or enable DHCP

and the system will allocate the IP address, subnet mask, default gateway and DNS server

address automacally.

Click Save.

Set Port Parameters

Set the HTTP, HTTPS, HTTP Listening, RTSP and Server port parameters.

Click Conguraon → Network → Network Service → HTTP(S) .

HTTP

It refers to the port through which the browser accesses the device. For example, when the

HTTP Port is modied to 81, you need to enter hp://192.0.0.65:81 in the browser for login.

HTTPS

Set the HTTPS for accessing the browser. Cercate is required when accessing.

HTTP Listening

The device can send alarm informaon to the event alarm IP address or domain name via HTTP

protocol/HTTPS protocol. Edit the event alarm IP address or domain name, URL, port, and

protocol.

You can also click Default to reset the HTTP parameters.

Note

The event alarm IP address or domain name should support the HTTP protocol/HTTPS protocol

to receive the alarm informaon.

RTSP

Click Conguraon → Network → Network Service → RTSP .

It refers to the port of real-me streaming protocol.

Plaorm Access

Plaorm access provides you an opon to manage the devices via plaorm.

Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T642MW Pro Series Face Recognition Terminals