Hikvision DS-K1T642MW User Manual

Loading ...

Figure 7-5 Wi-Fi Sengs

Enable the Wi-Fi funcon.

Congure the Wi-Fi parameters.

Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK.

If the target Wi-Fi is not in the list,tap Add Wi-Fi. Enter the Wi-Fi's name and password. And

tap OK.

Note

Only digits, leers, and special characters are allowed in the password.

Set the Wi-Fi's parameters.

By default, DHCP is enable. The system will allocate the IP address, the subnet mask, and the

gateway automacally.

If disable DHCP, you should enter the IP address, the subnet mask, and the gateway manually.

Tap OK to save the sengs and go back to the Wi-Fi tab.

Tap

to save the network parameters.

7.2.3 Set RS-485 Parameters

The face recognion terminal can connect external access controller, secure door control unit or

card reader via the RS-485 terminal.

Steps

Tap Comm. (Communicaon Sengs) on the Home page to enter the Communicaon Sengs

page.

Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T642MW Pro Series Face Recognition Terminals