Loading ...
Loading ...
Loading ...
SDS6000A Series Digital Oscilloscope User Manual
3 5 8 int.siglent.com
I/O Setting
35.3.1 LAN
Operate the following steps to set the LAN port:
Perform Utility>I/O>LAN Config to open the LAN Config dialog box.
A. Check Automatic (DHCP) to
enable dynamic IP. In this case,
the oscilloscope must be
connected to the local area
network with a DHCP server.
Contact your network
administrator to confirm the
relevant information.
B. When is not checked, the
oscilloscope uses static IP. Set
the static IP address, subnet
mask, and gateway separately.
C. When accessing more than two SIGLENT instruments through the web
browser, it is necessary to set a different VNC port number for each
instrument. The range is from 5900 to 5999.
D. MAC address of the instrument, read-only.
35.3.2 Network Storage
Perform Utility>I/O>Net storage to open the network storage dialog box:
Loading ...
Loading ...
Loading ...