Loading ...
Loading ...
Loading ...
4. Health and Safety Information
• Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles.
− A careless action can cause severe injury within a
fraction of a second.
Power tool use and care
• Do not force the power tool. Use the correct power
tool for your application.
− The correct power tool will do the job better and
safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it
on and o.
− Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or
remove the battery pack, if detachable, from the
power tool before making any adjustments, changing
accessories or storing power tools.
− Such preventive safety measures reduce the risk
of starting the power tool accidentally.
• Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
− Power tools are dangerous in the hands of
untrained users.
• Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may aect the
power tool’s operation. If damaged, have the power
tool repaired before use.
− Many accidents are caused by poorly maintained
power tools.
• Keep cutting tools sharp and clean.
− Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier
to control.
• Use the power tool, accessories and tool bits, etc., in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
− Use of the power tool for operations dierent from
those intended could result in a hazardous
situation.
• Keep handles and grasping surfaces dry, clean and
free from oil and grease.
− Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in
unexpected situations.
Service
• Have your power tool serviced by a qualied repair
person using only identical replacement parts.
− This will ensure that the safety of the power tool is
maintained.
4.2 Additional Safety Instructions for This
Grease Gun
• Use this product ONLY with the hose supplied.
− If the hose becomes damaged, contact Draper
Tools for replacement options.
• Have the hose replaced immediately if it shows signs
of wear, kinks or damage to the exterior.
• NEVER carry this product by the hose.
• This product can generate pressure up to 10,000psi;
ALWAYS wear eye protection.
• Keep hands clear of the rubber parts of the hose
during use.
• If the tool or target grease point has become jammed,
release the trigger and investigate the blockage.
− DO NOT continue to depress the trigger as this
may damage the tool or the battery.
Important: Read and understand the safety information
and instructions for any lubricant product before using it
with this tool.
WARNING! Lubricants may be highly ammable.
Keep this product and any lubricants away from
open ames, sparks and other sources of heat.
DO NOT use ammable lubricants in this tool.
4.3 Additional Safety Instructions for
Rechargeable Batteries
Important: Use ONLY the Draper Tools D20 range
battery pack and charger supplied with this product. DO
NOT use this charger with any batteries that are not part
of the Draper Tools D20 range.
WARNING! DO NOT use or charge the battery if
leakage is evident.
Chargers
WARNING! NEVER charge non-rechargeable or
damaged batteries.
• The supplied charger is for indoor use ONLY.
• Before connecting the charger to the power supply,
check that the plug, cable and charger casing are in
good condition and have any damaged part
immediately repaired by a suitably qualied person.
– 6 –
Loading ...
Loading ...
Loading ...