Loading ...
Loading ...
Loading ...
10. Maintenance and Troubleshooting
– 19 –
EN
10.4 Troubleshooting
Problem Possible Cause Remedy
The motor does
not start when
the trigger is
depressed.
The battery is not charged or is not
attached.
Charge and attach the battery (see 7.1 and 7.2).
The motor connection has developed
a fault.
Contact Draper Tools for repair and replacement
options.
The grease gun
does not expel
grease when the
trigger switch is
depressed.
The loaded lubricant is exhausted. Reload the grease tube using the desired method
(see 8).
The tool has not been primed or an air
pocket has accumulated.
Prime the tool to expel any collected air (see 8.5).
The grease gun
continues to fail
even after
priming.
Air is trapped in multiple places in the
mechanism, or the plunger follower is
binding inside the grease tube.
Empty and thoroughly clean the tool to ensure all
contaminants and air pockets have been purged.
Then reload and retry.
The lubricant has separated and is no
longer usable
Empty and clean the tool IMMEDIATELY to prevent
any oil from accessing the electric controls.
The battery will
not charge or
cannot hold its
charge.
The power supply to the charger is
inactive or faulty.
Check the charger power connection.
The battery or charger has developed
a fault.
Contact Draper Tools for replacement and repair
options.
Loading ...
Loading ...
Loading ...