Loading ...
Loading ...
Loading ...
7. Loading the Grease Gun
2. Loosen the air vent valve (1) by a couple of turns.
13 Fig.
(1)
3. Release the plunger rod from the lock slot (25) and
apply pressure to the handle until grease is expelled
from the opening.
4. If grease is not expelled, tighten the air vent valve and
repeat this process several times.
Important: If, after several attempts, grease is not
expelled from the valve, remove the grease tube,
manually pack the inside of the tube head (9) with
grease and then try again.
5. Tighten the air vent valve securely and squeeze the
trigger switch (19) until grease is expelled from the
hose.
Air pockets may be created during operation and cause
the tool to lose pressure. The priming process can also be
completed by loosening the grease tube by one full turn
instead of opening the air vent valve and following the
same procedure.
Important: Before use, read and understand all the
safety instructions listed in this manual. ALWAYS ensure
that the grease gun is primed before operation.
– 15 –
EN
Loading ...
Loading ...
Loading ...