Loading ...
Loading ...
Loading ...
7. Loading the Grease Gun
3. Remove the plastic cap from the cartridge and twist
the open end into the grease tube.
Important: DO NOT dispose of the cartridge caps
until the cartridge is empty in case it must be stored
in a partially used state.
7 Fig.
4. Remove the ring-pull seal from the other end of the
cartridge and screw the grease tube tightly back into
the grease tube head.
8 Fig.
5. Prime the grease gun; see 8.5 Priming the Grease
Gun and Expelling Air Pockets.
6. Slide the rod all the way into the grease tube.
9 Fig.
7. Reset the control panel display; see 10.3 Monitoring
Grease Flow.
To remove a cartridge:
1. Loosen the grease tube by one turn and pull the
plunger handle until it is fully extended.
2. Unscrew the grease tube from the grease tube head
and pull the cartridge out of the open end of the tube.
Grease cartridges with a smaller thread can screw
directly into the grease tube head.
Dispose of old cartridges responsibly and in accordance
with local regulations.
7.3 Filling the Grease Gun From a Bulk
Container
Important: This method of loading is particularly
susceptible to contamination of the lubricant and grease
tube. Take extra care to maintain a clean environment
and prevent contamination when loading in this way.
1. Unscrew and remove the grease tube (8) from the
grease tube head (9).
10
Fig.
(8)
(9)
– 13 –
EN
Loading ...
Loading ...
Loading ...