Loading ...
Loading ...
Loading ...
3. Product Introduction
Stock No(s). 03359,18097 (bare product)
Part No(s). D20GGKIT, D20GGB (bare product)
Rated voltage: 20V DC
High output mode:
Max. pressure: 10,000psi (689.5bar)
Max. ow rate: 140g/min
Low output mode:
Max. pressure: 6,000psi (413.7bar)
Max. ow rate: 100g/min
Operating temperature: -10 to +40°C
Capacities:
Cartridge: 400g, Ø54mm
Bulk: 450g
Sound pressure level: <70dB(A)
Vibration: <2.3m/s
2
Hose length: 1.06m
Net weight: 2.82kg
Charger
Stock No.: 97914
Part No.: D20BSC/2
Applicable batteries: 55887
00649
55898
55907
Charging times: 2.0Ah: 55 minutes
3.0Ah: 85 minutes
4.0Ah: 110 minutes
5.0Ah: 150 minutes
Rated voltage: 230V AC
Rated frequency: 50–60Hz
Rated output: 70W
Rated DC output voltage: 20V
Rated DC output current: 2.4A
Protective device rated current: 8A
Construction: Class II
Net weight: 0.42kg
Battery
Stock No.: 55887
Part No.: D20B2.0AH
Type: Li-ion
Rated voltage: 20V
Rating: 2.0Ah
Suitable ambient conditions:
Temperature during operation: -15 to 50°C
Temperature during charging: 4 to 40°C
Temperature during storage: 0 to 45°C
– 4 –
3.2 Specication
3.1 Scope
This product is designed for the application of
lubrication to xtures and ttings and can be loaded via
cartridges or from bulk. Outputs and diagnostics are
indicated on an LCD display.
Important: This product is suitable for use with standard
lithium-based lubricants (NLGI grades 2 and 3) ONLY. DO
NOT use this product to dispense water, adhesives or
corrosive substances.
This product is part of the D20 multi-tool battery system
and is suitable for regular use by enthusiasts and
tradespersons alike.
WARNING! This product is not a toy and must be
respected.
Read this manual in full before attempting to assemble,
operate or maintain the product and retain it for later use.
Important: The declared vibration total values and noise
emissions values have been measured in accordance
with a standard test method and may be used for
comparing one tool with another. These values may also
be used in a preliminary assessment of exposure.
WARNING! The vibration and noise emissions
during actual use of the product can dier from
the declared values depending on the mode
selected and the workpiece upon which it is
used. Before each use, estimate the likely
exposure resulting from the actual conditions of
use. Take into account all parts of the operation
cycle in order to identify any safety measures
required to protect the operator.
Loading ...
Loading ...
Loading ...