Loading ...
Loading ...
Loading ...
9
AXIS Q7414 - Accessing the video encoder blade
The Live View page
If your video encoder has been customized to meet specific requirements the buttons and other items described below may
or may not be displayed on the Live View page. The following provides an overview of each available button:
General controls
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile on
the Live View page. Stream profiles are configured under Video & Audio > Stream Profiles, see Stream Pro-
files, on page 1
6 for more information.
Pulse
- Click this button to activate the output for a defined period of time, such as switching a light on for
20 seconds.
Active/Inactive -
Click these buttons to manually start and stop a connected device - e.g. switch a light
on/off.
The Trigger buttons can trigger an event directly from the Live View page. These are configured under
Setup > Live View Config > Layout.
The Snapshot button saves a snapshot of the video image currently on display. Right-click on the video
image to save it in JPEG format on your computer. This button is primarily intended for use when the AXIS
Media Control viewer toolbar is not available.
Audio clip – Audio clips can be played manually from the Live View page. Select the audio
clip from the drop-down list and click the Play button.
AXIS Media Control toolbar
The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC), on page 12 for
more information. AMC displays the following buttons:
The Play button connects to the Axis product and starts playing a media stream.
The Stop stops the video stream being played.
The Snapshot button takes a snapshot of the current image. The location where the image is saved can be
specified in the AMC Control Panel.
Click the View Full Screen button and the video image will fill the entire screen. Press Esc (Escape) on the
computer
keyboard to cancel full screen view.
The Record button is used to record the current video stream. The location where the recording is saved can
be specified in the AMC Control Panel.
AMC Audio controls
AMC audio buttons control the speakers and microphone connected to the clie
nt computer. The buttons are only visible
when audio is enabled.
Speaker buttons - Click to switch the sound on or off.
Microphone buttons - Click to switch the sound on or off.
Use the slider to control the volume on the speaker and microphone.
Loading ...
Loading ...
Loading ...