Loading ...
Loading ...
Loading ...
23
SETTING OVEN CONTROLS
Restore Factory Settings (rESEt)
Your appliance was set with predetermined (de-
fault) oven control settings. Over time, users may
have made changes to these settings. The follow-
ing options may have been modifi ed since the
appliance was new.
• 12 or 24 hr display mode
• Continuous bake or 12-hour energy savings
mode
• Silent or audible controls
• Oven temperature display (Fahrenheit or Cel-
sius)
• Oven temperature adjustments (UPO)
To restore oven control to factory default set-
tings:
1. Press until “rESEt” appears in the display.
2. Press and hold START for three seconds. The
control has been reset with the default settings.
The display returns to the settings menu. After a
few seconds, it will return to the time of day.
Adjust Oven Temperature (UPO)
Your appliance has been factory calibrated and
tested to ensure an accurate baking temperature.
For the fi rst few uses, follow your recipe times and
temperature recommendations carefully. If you
think the oven is cooking too hot or too cool for
your recipe times, you can adjust the control so the
oven cooks hotter or cooler than the temperature
displayed.
Important: Do not use oven thermometers such as
those found in grocery stores to check the tem-
perature settings inside your oven. These oven
thermometers may vary as much as 20 to 40 de-
grees from actual temperatures.
The oven temperature may be increased as much
as +35°F (+19°C) or decreased -35°F (-19°C) from
the factory calibrated settings.
To increase or decrease the oven temperature by
20°F:
1. Press until “uPo” appears in the display.
2. Press START
3. Enter the desired adjustment using the number
keys. To make the adjustment negative, press
the Self Clean key.
The oven temperature may be increased as
much as +35°F or decreased -35°F from the
factory calibrated settings.
The oven temperature adjustment may be
made if your oven control is set to display tem-
peratures in °C (Celsius). Minimum and maxi-
mum settings for Celsius range from plus +19°C
to minus -19°C.
4. Press START to accept change.
Important note:
• Oven temperature adjustments will not change
the Broil, Steam Clean, Self Clean, or Keep
Warm temperatures.
Continuous bake setting or 12-hour
energy saving feature (E-S)
The oven control has a built-in 12-hour energy
saving feature that will shut o the oven if the oven
is left on for more than 12 hours. The oven control
can be programmed to override this feature for
continuous baking.
To change the continuous bake setting:
1. Press
until “E-S” appears in the display.
2. Press START.
3. Press to toggle between “on” and “oFF”.
4. Press START to accept when the desired set-
ting is displayed.
The display returns to the settings menu. After a
few seconds, it will return to the time of day.
Loading ...
Loading ...
Loading ...