Loading ...
Loading ...
Loading ...
24
Temperature display
L1: The temperature can be adjusted from 5 to 20 degrees depending on the cycle below (1
touch = 1 additional degree)
Decrease temperature
K3: Press the button once, the LED display will flash indicating the current temperature.
Press again to set the temperature. 1 touch will reduce the temperature by 1 degree. The
blink stops after 5 seconds without action on your part, and the newly set temperature is
recorded. The LED display then shows the actual inside temperature
Mode Fahrenheit/Celsius
K4: Switch the temperature display between Fahrenheit/Celsius by pressing the button.
How your wine cellar works:
There are two internal fans for airflow however fluctuations of up to 3 degrees is expected.
The average temperature throughout the fridge will be a maximum of 1.5˚C of the
requested temperature (once sufficient time for cooling has passed). Once a temperature
difference of 3˚C above the set temperature is detected, the cooling cycle will start to bring
the temperature down to below the set temperature. Once the cooler temperature is
reached, the cooling stops and the temperature inside the fridge is allowed to slowly
increase. This cycle is continuous and results in a very small range of constant fluctuation.
Loading ...
Loading ...
Loading ...