Loading ...
Loading ...
Loading ...
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
●
The beeper will not sound if battery power
is low.
Using the CASIO WATCHES
Phone App to Configure
Timer Settings
If the watch is paired with a phone, you can
also use the CASIO WATCHES phone app to
set the timer start time.
l
Configuring Watch Settings
Setting a Start Time
The start time can be set in 1-minute units up
to 60 minutes.
1. Enter the Timer Mode.
l
Navigating Between Modes
2. Loosen the crown and then pull it out.
This causes the minutes digits to flash.
Minutes
Crown
3. Rotate the crown to change the timer start
time minutes.
4. Push the crown back in and then lock it.
Note
●
If you do not perform any operation for
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
2. Use the operations below to perform a
timer operation.
A
A
A
(Time up)
Resume
Pause
(Countdown starts)
Start
●
A beeper will sound for 10 seconds to
let you know when the end of a
countdown is reached.
●
You can reset a paused countdown to
its start time, by pressing (C).
3. Press any button to stop the tone.
Watch Operation Guide 5713
47
Loading ...
Loading ...
Loading ...