Loading ...
Loading ...
Loading ...
Temperature Reading
Precautions
Body temperature, direct sunlight, and
humidity all have an effect on temperature
readings. To help ensure more accurate
temperature readings, remove the watch from
your wrist, wipe it dry of any moisture, and
place it in a well-ventilated location not
exposed to direct sunlight. You should be able
to take temperature readings after about 20 to
30 minutes.
Viewing Altitude
Records
You can use the Altitude Record Recall Mode
to view manually recorded and auto recorded
data.
l
Recording Altitude Readings
Viewing Recorded Data
1. Enter the Altitude Record Recall Mode.
l
Navigating Between Modes
This displays a record of data recorded in
the Altimeter Mode.
2. Use (A) and (C) to display the data you
want to view.
●
Holding down (A) or (C) scrolls at high
speed.
ACCA
ACCA
C*
A*
A
C
Cumulative Descent
Cumulative Ascent Low Altitude
High Altitude
Auto Record Data
Manually Recorded Data
* Each press of a button scrolls to the top
screen of the next manually recorded
data record, numbered from 1 ([-01-]) to
a maximum of 30 ([-30-]).
Note
●
If there is no data left in memory due to
a data delete operation, error, or some
other reason, [- - - -] or [0] will appear
on the display.
●
If the cumulative ascent (ASC) or
cumulative descent (DSC) value
exceeds 99,999 m (327,995 feet), it
will revert to 0 and continue from there.
●
Pressing (D) returns to the top screen
(record number, DSC, ASC, MAX, or
MIN) of the data that you are viewing.
●
If you do not perform any operation for
about three minutes while in the
Altitude Record Recall Mode, the
watch automatically returns to the
Timekeeping Mode.
●
Manually Recorded Data
After displaying the top screen of a manually
recorded data record (01 through 30), the
record’s data screens appear in sequence as
shown below.
Example: Manually recorded Record 01
D
D
2 seconds
2 seconds
1 second
Altitude Time
Recording dateRecord number
Watch Operation Guide 5713
44
Loading ...
Loading ...
Loading ...